The aim of this study was to evaluate the subcutaneous tissue response in rats and the antimicrobial activity of intracanal calcium hydroxide dressings mixed with different substances against E. faecalis. Fifty four rats were divided into three experimental groups according to the vehicle in the calcium hydroxide treatment: 0.4% chlorohexidine in propylene glycol (PG), Casearia sylvestris Sw in PG and calcium hydroxide+PG (control group). The pastes were placed into polyethylene tubes and implanted into the subcutaneous tissue. After 7, 14 and 30 days, the samples were processed and histologically evaluated (hematoxylin and eosin). The tissue surface in contact with the material was analyzed, and the quantitative analysis determined the volume density occupied by the inflammatory infiltrate (giant cells, polymorphonuclear cells and mononuclear cells), fibroblasts, collagen fibers and blood vessels. For the antimicrobial analysis, 20 dentin blocks infected with E. faecalis were treated with calcium hydroxide pastes in different vehicles; 0.4% chlorhexidine in PG, PG, extract from Casearia sylvestris Sw in PG and a positive control (infection and without medication) for 7 days. The efficiency of the pastes was evaluated by the live/dead technique and confocal microscopy. The results showed that 0.4% chlorhexidine induced a higher inflammatory response than the other groups. The Casearia sylvestris Sw extract showed satisfactory results in relation to the intensity of the inflammatory response. In the microbiological test, there were no statistical differences between the evaluated intracanal dressings and the percentage of bacterial viability was between 33 and 42%. The control group showed an 86% viability. Antimicrobial components such as chlorhexidine or Casearia sylvestris Sw did not improve the antimicrobial activity against E. faecalis in comparison to the calcium hydroxide+PG treatment. In addition, the incorporation of chlorhexidine in the calcium hydroxide paste promoted the highest inflammatory response.

Objective: To evaluate the response of rat subcutaneous tissue in implanted polyethylene tubes that were filled with GMTA Angelus and Portland cements containing different arsenic concentrations. Material and Methods: Atomic absorption spectrophotometry was utilized to obtain the values of the arsenic concentration in the materials. Thirty-six rats were divided into 3 groups of 12 animals for each experimental period. Each animal received two implants of polyethylene tubes filled with different test cements and the lateral of the tubes was used as a control group. After 15, 30 and 60 days of implantation, the animals were killed and the specimens were prepared for descriptive and morphometric analysis considering: inflammatory cells, collagen fibers, fibroblasts, blood vessels and other components. The results were analyzed utilizing the Kuskal-Wallis test and the Dunn's Multiple test for comparison (p<0.05). Results: The materials showed, according to atomic absorption spectrophotometry, the following doses of arsenic: GMTA Angelus: 5.01 mg/kg, WPC Irajazinho: 0.69 mg/kg, GPC Minetti: 18.46 mg/kg and GPC Votoran: 10.76 mg/kg. In a 60-day periods, all specimens displayed a neoformation of connective tissue with a structure of fibrocellular aspect (capsule). Control groups and MTA Angelus produced the lower amount of inflammatory reaction and GPC Minetti, the highest reaction. Conclusions: There was no direct relationship between the concentration of arsenic present in the composition of the materials and the intensity of the inflammatory reactions. Higher values, as 18.46 mg/kg of arsenic in the cement, produce characteristics of severe inflammation reaction at the 60-day period. The best results were found in MTA angelus.

Objectives: To investigate if there is a relation between the increase of bismuth oxide and the decrease of pH levels and an intensification of toxicity in the Portland cement. Material and Methods: White Portland cement (WPC) was mixed with 0, 15, 20, 30 and 50% bismuth oxide, in weight. For the pH level test, polyethylene tubes were filled with the cements and immersed in Milli-Q water for 15, 30 and 60 days. After each period, the increase of the pH level was assessed. For the biocompatibility, two polyethylene tubes filled with the cements were implanted in ninety albino rats (n=6). The analysis of the intensity of the inflammatory infiltrate was performed after 15, 30 and 60 days. The statistical analysis was performed using the Kruskal-Wallis, Dunn and Friedman tests for the pH level and the Kruskal-Wallis and Dunn tests for the biological analysis (p<0.05). Results: The results showed an increase of the pH level after 15 days, followed by a slight increase after 30 days and a decrease after 60 days. There were no significant statistical differences among the groups (p>0.05). For the inflammatory infiltrates, no significant statistical differences were found among the groups in each period (p>0.05). The 15% WPC showed a significant decrease of the inflammatory infiltrate from 15 to 30 and 60 days (p<0.05). Conclusions: The addition of bismuth oxide into Portland cement did not affect the pH level and the biological response. The concentration of 15% of bismuth oxide resulted in significant reduction in inflammatory response in comparison with the other concentrations evaluated.

Objective To evaluate the biocompatibility and the setting time of Portland cement clinker with or without 2% or 5% calcium sulfate and MTA-CPM. Material and Methods Twenty-four mice (Rattus norvegicus) received subcutaneously polyethylene tubes filled with Portland cement clinker with or without 2% or 5% calcium sulfate and MTA. After 15, 30 and 60 days of implantation, the animals were killed and specimens were prepared for microscopic analysis. For evaluation of the setting time, each material was analyzed using Gilmore needles weighing 113.5 g and 456.5 g, according to the ASTM specification Number C266-08 guideline. Data were analyzed by ANOVA and Tukey's test for setting time and Kruskal-Wallis and Dunn test for biocompatibility at 5% significance level. Results Histologic observation showed no statistically significant difference of biocompatibility (p>0.05) among the materials in the subcutaneous tissues. For the setting time, clinker without calcium sulfate showed the shortest initial and final setting times (6.18 s/21.48 s), followed by clinker with 2% calcium sulfate (9.22 s/25.33 s), clinker with 5% calcium sulfate (10.06 s/42.46 s) and MTA (15.01 s/42.46 s). Conclusions All the tested materials showed biocompatibility and the calcium sulfate absence shortened the initial and final setting times of the white Portland cement clinker.

OBJECTIVES: To compare, in vivo, the accuracy of conventional and digital radiographic methods in determining root canal working length. MATERIAL AND METHODS: Twenty-five maxillary incisor or canine teeth from 22 patients were used in this study. Considering the preoperative radiographs as the baseline, a 25 K file was inserted into the root canal to the point where the Root ZX electronic apex locator indicated the APEX measurement in the screen. From this measurement, 1 mm was subtracted for positioning the file. The radiographic measurements were made using a digital sensor (Digora 1.51) or conventional type-E films, size 2, following the paralleling technique, to determine the distance of the file tip and the radiographic apex. RESULTS: The Student "t" test indicated mean distances of 1.11 mm to conventional and 1.20 mm for the digital method and indicated a significant statistical difference (p<0.05). CONCLUSIONS: The conventional radiographic method was found to be superior to the digital one in determining the working length of the root canal.

OBJECTIVE: This study compared the influence of three epoxy resin-based sealers with distinct radiopacities on the observers' ability to detect root canal filling voids during radiographic analysis. MATERIAL AND METHODS: The root canals of 48 extracted maxillary canines were prepared and divided into three groups. Each group was laterally condensed with one sealer (AH Plus®, Acroseal® or a non-radiopaque sealer), and a longitudinal void was simulated in half of the specimens from each group (n=8). Buccolingual radiographs were obtained and randomly interpreted for voids by a radiologist and an endodontist in a blinded fashion. Teeth were cut and inspected under a microscope to confirm the position of void. Differences in sensitivity and specificity between groups and examiners were compared using the Fisher's Exact and McNemar tests, respectively (α=0.05). RESULTS: Significantly lower sensitivity levels (p<0.05) were observed in the coronal portion of fillings performed with both radiopaque sealers. Specificity values for Acroseal® were significantly higher (p<0.05) in the coronal and apical portions of fillings. CONCLUSIONS: The type of root canal sealer can affect the observers' ability to detect root canal filling voids during radiographic analysis of upper single-rooted teeth.

OBJETIVES: The aim of this study was to investigate through scanning electron microscopy (SEM) the cleaning of root canal walls after the use of experimental propolis or calcium hydroxide root canal dressings. MATERIAL AND METHODS: Twenty single-rooted teeth were used. After conventional cleaning and shaping procedures and removal of the smear layer with 17% EDTA, the teeth were divided into four groups according to the medication used (N=5): Group I (control) - No drug, Group II - Calcium hydroxide dressing, Group III - Propolis paste A70D and Group IV - Propolis paste D70D. The medications were introduced into the root canals and maintained for 7 days, then removed with a K-file and 5 mL of 1% sodium hypochlorite irrigation. Finally, the canals were flushed with 2 mL of 17% EDTA for 3 min. For SEM analysis, the roots were cleaved and microphotographs from the middle third of the root canal were taken at 750x. The cleaning of the root canal walls was determined by the number of open dentinal tubules as verified with the software Image Tool 3.1. The statistical analysis was performed by ANOVA and Tukey's test (p<0.05). RESULTS: The results showed no statistically significant difference between the calcium hydroxide and propolis groups. CONCLUSIONS: The experimental propolis pastes presented acceptable physical characteristics to be used as intracanal medicaments.

OBJECTIVE: This study used dye leakage assay and scanning electron microscopy to evaluate, respectively, the sealing ability and marginal adaptation of three root-end filling materials used as apical plugs, as well as the possible correlation between these properties. MATERIAL AND METHODS: Ninety-eight single-rooted human teeth were prepared to simulate an open apex. The teeth were allocated to three experimental groups (n = 30), which received a 5-mm thick apical plug of (1) gray MTA AngelusTM, (2) CPM TM and (3) MBPc, and two controls groups (n = 4). After immersion in 0.2% Rhodamine B solution for 48 h, the teeth were sectioned longitudinally and analyzed by Image Tool 3.0 software. The marginal adaptation between apical plugs and the root canal walls were analyzed by SEM. RESULTS: MBPc had significantly less (p<0.05) apical leakage than the other materials. Regarding marginal adaptation, CPM TM showed the best numerical results, though without statistical significance from the other materials (p<0.05). There was no correlation between the two properties. CONCLUSIONS: When used as apical plugs, the tested root-end filling materials had similar marginal adaptation to the dentin walls, but MBPc had the best sealing ability, as demonstrated by the least apical leakage from all tested materials.

O objetivo do estudo foi determinar a porcentagem de espaços vazios, guta-percha e cimento após a obturação por 4 diferentes técnicas. Cinquenta e dois incisivos laterais superiores humanos extraídos foram instrumentados pela técnica coroa-ápice sem pressão. Os dentes foram randomicamente divididos em 4 grupos (n=13): Condensação lateral (LC), Técnica híbrida de Tagger (TH), MicroSeal (MS) e GuttaFlow (GF). Foram feitas secções horizontais a 2, 10 e 15 mm do ápice. Imagens digitais foram obtidas dos canais por meio de estereomicroscópio e analisadas no programa Image Tool 3.0. A análise estatística foi feita utilizando o teste de Kruskal-Wallis (α=0,05). Em geral foi observado um significante decréscimo na área de guta-percha e um aumento na área de cimento para todas as técnicas analisadas (p<0,05). Com relação à presença de espaços vazios, não houve diferença estatística entre as técnicas (p>0,05). As técnicas MS e TH apresentaram área de guta-percha maior que as técnicas LC e GF nos terços médio e cervical (p<0,05). Após análise dos resultados foi possível concluir que a área de guta-percha nas obturações diminui em sentido apical, independente da técnica utilizada.

The aim of this study was to determine the percentage of voids, gutta-percha and root canal sealer using 4 different filling techniques. Fifty-two extracted maxillary lateral incisors were prepared using the crown-down pressureless technique. The teeth were randomly divided in 4 groups (n=13): Lateral compaction (LC), Tagger's hybrid (TH), MicroSeal (MS) and GuttaFlow (GF) techniques. Horizontal cross-sections were made at the 2, 10 and 15 mm levels from the apex. Digital images of the root canal areas were acquired using a stereomicroscope and examined using the Image Tool 3.0 software. Statistical analysis was performed using the Kruskal-Wallis test (α=0.05). In general, a significant decrease in the gutta-percha filled area and increase of sealer area were observed at the apical level for all the evaluated techniques (p<0.05). With regard to the presence of voids, no significant difference was found. MS and TH techniques showed a larger gutta-percha filled area than LC and GF techniques at the coronal and middle third level (p<0.05). From the results of the present study, it may be concluded that the gutta-percha filled area of fillings decrease at the apical level, regardless of the filling technique used.

O canino inferior é tido como um dente unirradiculado e com apenas um canal. Todavia, pode ocorrer o aparecimento de dois canais e, mais raramente, duas raízes. Este artigo apresenta o caso clínico de uma paciente com ambos os caninos inferiores apresentando duas raízes e dois canais radiculares. A radiografia inicial periapical dos caninos mandibulares inferiores direito e esquerdo para tratamento endodôntico revelou a presença de duas raízes em cada um deles. Uma vez realizada a abertura coronária, o preparo do terço cervical foi feito com a lima SX do sistema ProTaper® e a odontometria foi determinada e confirmada eletronicamente com o localizador apical eletrônico Root ZX. O preparo foi finalizado com a série de instrumentos do sistema ProTaper® e a obturação foi realizada com cones de guta-percha e cimento obturador resinoso sob a técnica Híbrida de Tagger. As radiografias finais mostraram dois canais bem obturados terminando nos limites apicais estabelecidos pelos localizadores apicais eletrônicos. O controle de 6 meses mostrou sucesso clínico e radiográfico do tratamento endodôntico. Os clínicos devem sempre considerar a presença de variações anatômicas em todo tratamento endodôntico. A despeito da baixa prevalência, pode haver variações no número de raízes e canais de caninos inferiores, como demonstrado neste caso clínico.

The mandibular canine is usually considered a single-rooted tooth with a single root canal. However, two canals and more rarely two roots may also occur. This paper reports the case of a patient with bilateral mandibular canines with two roots and two root canals. The initial periapical radiographs of the mandibular right and left canines for endodontic treatment revealed the presence of two roots in each tooth. After coronal opening, the cervical third was prepared with a SX file of the ProTaper® system and root canal length was confirmed using Root ZX electronic apex locator. Root canal preparation was completed with the series of ProTaper® instruments and the root canal was filled with gutta-percha and an epoxy resin-based endodontic sealer according to Tagger's hybrid technique. The final radiographs showed two well-obturated canals ending at the electronically located apexes. The 6-month posttreatment follow-up showed apparent clinical and radiographic success. Clinicians should always consider the presence of anatomical variations in the teeth during endodontic treatments. Despite the low prevalence, variations may occur in the number of roots and root canals of mandibular canines, as demonstrated in this case report.

This ex vivo study evaluated the quality of digital radiographic images obtained with the photostimulable phosphor plate system (Digora) according to the processing delay and maintenance of optical plates in either opaque (supplied with the system) or transparent protective plastic cases during this period. Five radiographs were obtained from the mandibular molar region of a dry human mandible using optical plates. These plates were placed in the protective plastic cases before obtaining the radiographs and were processed immediately or after processing delays of 5, 60 and 120 min, when the case was removed. The results revealed a reduction in image quality when processing was delay 120 min compared to the other times. The opaque case provided better protection to the sensor than the transparent case. In conclusion, a 120-min processing delay for the Digora system caused a reduction in image quality, yet without interfering with the quality of diagnosis. The opaque case supplied by the system's manufacturer provided better protection to the optical plate than the transparent case.

This study investigated the solubility of mineral trioxide aggregate (MTA) and Portland cement since its mixture until 672 hours, by means of two complimentary methods. Metal ring molds filled with the cements were covered with distilled water and, at each experimental time (3, 24, 72, 168, 336 and 672 hours), were weighed as soon as the plates in which the samples have been placed. Empty rings served as the control group (n=8). Mean weight gain and loss was determined and analyzed statistically by two-way ANOVA and Tukey's test for all pairwise comparisons. Only Portland cement showed less than 3% weight loss through 24 hours. Detached MTA residues were heavier than those of Portland cement over the 3 to 168 hours. The weight of MTA rings increased more than that of Portland rings within 672 hours (p=0.05). The findings of the present study indicate that, in an aqueous environment MTA is more soluble than Portland cement and exceeds the maximum weight loss considered acceptable by ISO 6876 standard (2001).

The aims of this study were to evaluate the quality of indirect digitized radiographic images taken during endodontic procedures and to compare the measurements recorded with this technique to those obtained from conventional radiographs. Two-hundred conventional periapical radiographs taken at the undergraduate Endodontics Clinic of the Dental School of Bauru were digitized. The conventional and indirect digitized images were compared by three examiners as to the quality and accuracy of the measurements recorded during endodontic treatment, in canal length determination, gutta-percha adaptation, lateral condensation and final obturation. The conventional radiographs were observed on a film viewer, surrounded by a dark card, and measured with magnifying glass and a millimeter ruler; the indirect digitized images were evaluated on the Digora® for Windows software, with free utilization of the bright/contrast tool. Unlike the conventional radiographic images, all indirect digitized images were considered as having a high quality. The distance between the filling material and the root apex was 0.117 mm larger, on average, for the Digora® system (p<0.01). The measurements achieved by the investigated radiographic methods were clinically similar and they are thus equivalent. Changes in brightness and contrast of the images using Digora®software improved the diagnosis.

This study evaluated the sealing ability of apical plugs fabricated with gray MTA AngelusTM sealer, CPM TM sealer and MBPc sealer. The root canals of 98 extracted single-rooted human teeth were instrumented with #5 to #1 Gates Glidden drills according to the crown-down technique until the #1 drill could pass through the apical foramen. The specimens were then prepared with K-files, starting with an ISO 50 until an ISO 90 could be visualized 1 mm beyond the apex. After root canal preparation, the external surface of each root was rendered impermeable and roots were assigned to 3 experimental groups (n = 30), which received a 5-mm thick apical plug of gray MTA AngelusTM, CPM TM and MBPc, and two control groups (n=4). The remaining portion of the canal in the experimental groups was filled by the lateral condensation technique. The teeth of each group, properly identified, were fixed on utility wax by their crowns and were placed in plastic flasks, leaving the apex free and facing upward. The flasks were filled with 0.2% Rhodamine B solution, pH 7.0, so as to completely cover the root apex of all teeth. The sealing ability was analyzed by measuring 0.2% Rhodamine B leakage after all groups had been maintained in this solution for 48 hours. Data were analyzed statistically by Kruskal-Wallis test and Dunn test with a=5%. The results showed that, among the tested materials used for fabrication of apical plugs, MBPc sealer had the least amount of leakage with statistically significant difference (p<0.05).

The aim of this study was to evaluate histologically, three types of calcium sulfate - Merck (Brazil), Surgiplaster (Italy) and Capset (USA) - in surgically created defects on rabbit femurs. Twenty male New Zealand rabbits were used. Two surgical bone defects (5 mm diameter x 8 mm depth) were created on each distal epiphysis using a #3 Dentoflex trephine bur. Defects were filled with: group 1 - di-hydrated calcium sulfate (Merck); group 2 - Capset (Lifecore-USA); group 3 - Surgiplaster (Classimport-Italy); group 4 - control (blood clot). The animals were sacrificed 30, 60, 90 and 180 days postoperatively. Semi-serial 6-mm-thick sections were obtained, stained with hematoxylin and eosin and examined under light microscopy. Bone defects treated with calcium sulfate exhibited new bone formation regardless of the product trademark.